Irrigation Pump Repair · Jacksonville, FL
Irrigation Pump Repair in Jacksonville, FL
Many Northeast Florida sprinkler systems run off a shallow well or a lake pump instead of city water. When the pump loses prime, cycles on and off, or hums without moving water, the whole yard stops getting watered. We troubleshoot well-fed and pump-fed irrigation systems across Duval, Nassau, Clay, and St. Johns counties.
West Water Solutions troubleshoots irrigation pump problems in Jacksonville, including pumps that lose prime, short-cycle, run without building pressure, or will not start from the controller. We test the pump start relay, controller wiring, suction side, and zones together so the real cause is found before parts are replaced. Call (904) 909-1996 or book online.
Irrigation pump problems we see
Pump runs but no water reaches the heads
Usually lost prime from an air leak on the suction side, a failed foot valve, or a dropping water level in a shallow well during dry spells.
Pump will not start with the timer
Often a failed pump start relay, a bad controller master/pump output, or a tripped breaker after a lightning storm.
Pump clicks on and off rapidly
Short-cycling can point to a stuck valve, a leak on the pressure side, or a pressure switch problem, and it wears the motor out fast.
Weak pressure on every zone
Worn impellers, clogged screens, or too many heads on one zone for what the pump can supply.
Orange or rust stains on the house and walks
Iron-rich well water is common in Northeast Florida; it also clogs nozzles and valve diaphragms over time.
Pump runs after the cycle ends
A start relay stuck closed or a wiring fault can leave the pump running dead-headed, which can overheat it.
How we troubleshoot a pump-fed system
- 1
Check power and the start relay
We confirm the breaker, wiring, and pump start relay respond to the controller before looking at the pump itself.
- 2
Test the suction side
We look for lost prime, air leaks, and check valve or foot valve problems that stop the pump from pulling water.
- 3
Test pressure zone by zone
Each zone is run to find leaks, stuck valves, or zones oversized for the pump.
- 4
Explain options before work
You get the cause and a price before any repair. If a pump replacement is needed, we tell you up front.
Why pump systems are common around Jacksonville
- Many homes in Clay, St. Johns, and outlying Duval County water lawns from shallow irrigation wells or retention ponds to avoid metered city water costs.
- Dry spring months can drop shallow well levels, which is when lost-prime calls tend to rise.
- Summer lightning storms are a frequent cause of failed pump start relays and controller outputs.
- Pump-fed systems still follow St. Johns River Water Management District watering days.
Areas we cover
Mon–Sat 7:30 AM – 5:00 PM. Licensed and insured. Serving residential and commercial properties across Duval, Nassau, Clay, and St. Johns counties.
(904) 909-1996Frequently asked questions
Can you repair a sprinkler system that runs off a well?
Yes. We troubleshoot well-fed and pond-fed irrigation systems, including the pump start relay, controller, valves, and zones.
Why does my irrigation pump keep losing prime?
The most common causes are an air leak on the suction line, a failing check or foot valve, or a low water level in the well. We test each before recommending parts.
Do watering restrictions apply to well water?
In the St. Johns River Water Management District, landscape irrigation restrictions generally apply regardless of the water source. See our watering days guide for details.
How much does irrigation pump repair cost?
It depends on whether the issue is a relay, a prime problem, or the pump itself. We diagnose first and give you the price before any work starts.